What do WEP and WPA mean?

WEP and WPA (along with WPA2) are names for different encryption tools used to secure your wireless connection.

Encryption scrambles the network connection so that no one can listen in to it and look at which web pages you are viewing, for example. WEP stands for Wired Equivalent Privacy, and WPA stands for Wireless Protected Access.

WPA2 is the second version of the WPA standard.

Using some encryption is always better than using none, but WEP is the least secure of these standards, and you should not use it if you can avoid it.

WPA2 is the most secure of the three.

If your wireless card and router support WPA2, that is what you should use when setting up your wireless network.
_________________________

Comments

How to Connect Two Computers Via Crossover Ethernet Cable?

In this tutorial we are going to show you how to transfer data from one computer to another. We need to PC/Laptop and a crossover cable to transfer data. PC 1 Step1: Go to “Open Networking and Sharing Center“. Step2: Click on “Local Area Connection“. Step3: Now click on “Properties“. Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“. Step5: Click on “Use the following IP address:” and enter the IP address: as 192.168.1.1 and just give a click onSubnet mask. Once done click “Ok” and close it. PC 2 Step1: Go to “Open Networking and Sharing Center“. Step2: Click on “Local Area Connection“. Step3: Now click on “Properties“. Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“. Step5: Click on “Use the following IP address:” and enter the IP address: as 192.168.1.2 and just give a click onSubnet mask. Once done click “Ok” and close it. Now two computers are connected. To share files we need to give access to our drives, so follow the c

What is Port (computer networking)

In the internet protocol suite, a port is an endpoint of communication in an operating system. While the term is also used for female connectors on hardware devices (see computer port), in software it is a logical construct that identifies a specific process or a type of network service. A port is always associated with an IP address of a host and the protocol type of the communication, and thus completes the destination or origination network address of a communication session. A port is identified for each address and protocol by a 16-bit number, commonly known as the port number. For example, an address may be 'protocol: TCP, IP address: 1.2.3.4, port number: 80', which may be written 1.2.3.4:80 when the protocol is known from context. Specific port numbers are often used to identify specific services. _________________________

Denial of service (DoS) attack Trojans

These Trojans give the attacker the power to start a distributed denial of service (DDoS) attack if there are enough victims. The main idea is that if you have 200 infected ADSL users and you attack the victim simultaneously from each, this will generate HEAVY traffic (more than the victim's bandwidth can carry, in most cases), causing its access to the Internet to shut down. WinTrinoo is a DDoS tool that has recently become very popular; through it, An attacker who has infected many ADSL users can cause major Internet sites to shut down; Early examples of this date back to February 2000, when a number of prominent e-commerce sites such as Amazon, CNN, E*Trade, Yahoo and eBay were attacked. Another variation of a DoS Trojan is the mail-bomb Trojan, where the main aim is to infect as many machines as possible and simultaneously attack specific email address/addresses with random subjects and contents that cannot be filtered. Again, a DoS Trojan is similar to a virus,

Learn Ethical Hackings

Search This Blog